Adding The Ds9000; Fig. 2.2 Ds9000 Wiring Diagram As A Set-Point Speed Controller (Bronco Ii Series Dc Motor Controller) - Seco DS9000 Installation & Operation Manual

2.6

ADDING THE DS9000

The DS9000 provides a signal that replaces the signal usually obtained from the speed potentiometer
on the drive to be controlled.
The control signal from the DS9000 is isolated from ground and common on the DS9000 and the
signal may be connected to non-isolated drives.
Figure 2.2
DS9000 Wiring Diagram as a setpoint speed controller
(BRONCO II Series DC motor controller)
15