Genie CCTV MVD83SPX/12 Instruction Manual

Model : MVD83SPX /12
Pixim Digital Day/Night
Mini Vandal Dome Camera
Instruction Guide
GENIE CCTV LTD.
CCTV House, City Park, Watchmead, Welwyn Garden City, Hertfordshire, AL7 ILT
Tel : +44 (0) 1707 330541 Fax : +44 (0) 1707 330543
www.geniecctv.com
Edition. GN-OCTOBER 2011
■ Features
High Resolution colour for High Sensitivity for low-light
crisp, clear video images
The built-in high sensitivity
ㆍ690TVL Effective
PIXIM SEAWOLF Sensor enables
a clear image even at 0.1Lux
Wide Dynamic Range (WDR)
The camera delivers clear, high Programmable GAMMA
quality pictures even in backlight, Processing
by increasing exposure in dark
areas while decreasing it in bright
Motion Detection
areas; a corrected image with
clear details results. Since the camera detects motion
ㆍ120dB maximum dynamic range without any additional external
sensor, you can monitor activity
more efficient.
DNR (Digital Noise Reduction)
The amount of low illuminance noise
Additional Functions
has been significantly reduced, and
the signal-to-noise ratio (S/N ratio) SENS-UP, FREEZE,
as well as horizontal resolution, FLIP (H/V-REV), D-ZOOM,
have been improved resulting in a SHARPNESS and PRIVACY
functions are provided.
clear and sharp image image even
in low light.
Controlled by OSD Menu
Day & Night
The camera can be controlled by
selecting text displayed on the
The camera identifies whether it
is day or night and automatically monitor screen.
switches to the appropriate mode,
depending on its environment.
3 Axis built-in Vandal Resistant
By day, the camera switches to
Dome Housing
colour mode in order to maintain
optimal colour. At night, it switches
Weather Proof (IP66)
to B/W mode so as to obtain better
picture definition.
■ Installation Of Camera
■
Surface mount
ㆍFix the BASE HOUSING to the
desired place with screws supplied.
ㆍAdjust desired scene by turning and
moving the CAMERA BRACKET and
fix it with STOPPER RING by turning
it by hand.
ㆍPut the DOME COVER over the
BASE HOUSING and turn it clockwise
by hand.
ㆍTo fix DOME COVER tight, use SET
SCREW.
■
Flush mount
ㆍUse "Ceiling processing sticker" on
the desired place to install camera
and make a hole on that place.
ㆍPlace the BASE HOUSING on the
hole and fix it with screws supplied.
ㆍAdjust desired scene by turning and
moving the CAMERA BRACKET
and fix it with STOPPER RING by
turning it by hand.
ㆍPut the DOME COVER over the
BASE HOUSING and turn it
clockwise by hand.
■ Dimensions
57.0
80.0
57.0
(Unit : mm)
88.0
■ Cable Connections
POWER
VIDEO OUT
POWER
VIDEO OUT
RIGHT button
UP button
DOWN button
LEFT button SET button
■ How to Use the Camera
SETUP
Select the function using Change the status using
PRESETS NORMAL
the UP or DOWN button. the LEFT or RIGHT button.
EXPOSURE..
WDR MIDDLE
WHITE BALANCE ATW
DAY&NIGHT AUTO..
IMAGE ADJ..
SPECIAL..
EXIT MENU.
3. Set up a selected item by using the Left and Right buttons.
4. To finish and save the settings, select 'EXIT MENU' and press the SET button.
Note
• An item with the .. icon also has sub-menus. To select a sub-menu,
press the SET button.
PRESETS
SETUP
PRESETS NORMAL
EXPOSURE..
WDR MIDDLE
WHITE BALANCE ATW
DAY&NIGHT AUTO..
IMAGE ADJ..
SPECIAL..
EXIT MENU.
● NORMAL : Normal environment.
● INDOOR : Indoor environment.
● OUTDOOR : Outdoor environment.
● BACKLIGHT : Backlight environment.
EXPOSURE
When the SETUP menu screen is displayed, select'EXPOSURE'by
using the Up and Down buttons so that the arrow indicates'EXPOSURE'.
SETUP
PRESETS NORMAL
EXPOSURE..
WDR MIDDLE
WHITE BALANCE ATW
DAY&NIGHT AUTO..
IMAGE ADJ..
SPECIAL..
EXIT MENU.
EXPOSURE
LENS SELECT MANUAL..
BLC OFF
EXPOSURE MODE 50i
AGC MEDIUM
DNR MIDDLE
HIGHLIGHT ON
COLOR ROLL OFF
SENS-UP 2X
PREVIOUS PAGE..
● LENS SELECT : Using this function, you can control the screen brightness.
- DC / Manual : Select Lens Type.
LENS MENU
DC GAIN
0 120 255
AI THRESH
-48 -48 60
PREVIOUS PAGE..
● BLC : To optimize the scene when there is a strong backlight behind
the object.
- ON / OFF selectable
■ How to Use the Camera
ADVANCED BLC SETUP
PERCENTILE
10 35 50
PREV. SAVE. CANCEL.
● EXPOSURE MODE : To select the number of fields and number of
exposure cycles.
- 50i /25p selectable
● AGC (AUTO GAIN CONTROL) : In dark environments, the higher the
gain level, the brighter the screen but the higher the noise.
- OFF / LOW / MEDIUM / HIGH selectable
● DNR (Digital Noise Reduction) : The level of background noise in low
light decreases automatically as the level of gain changes.
- OFF / LOW / MIDDLE / HIGH selectable
● HIGHLIGHT : To optimise the scene when high dynamic range lighting
is detected.
- ON : bright parts of the image are most visible.
- OFF : dark parts of the image are most visible.
● COLOR ROLL : To control a detector that finds colour fluorescent roll.
- OFF / LOW selectable
● SENS-UP : When it is night or dark, the camera automatically detects
the light level and maintains a clear picture if this mode is activated.
- 2X, 4X, 8X, 16X, 32X
- OFF : Deactivates the SENS-UP function.
WDR
SETUP
PRESETS NORMAL
EXPOSURE..
WDR MIDDLE
WHITE BALANCE ATW
DAY&NIGHT AUTO..
● WDR : When the image has simultaneous bright and dark areas, the
Wide Dynamic Range makes both areas distinct.
- LOW / MIDDLE / HIGH / USER selectable.
WDR LEVEL
BIAS 2 -30 30
LIMIT 36 0 36
PREVIOUS PAGE..
WHITE BALANCE
Use the White Balance function to adjust the screen colours.
1. Position the cursor to point to WHITE BAL on the SETUP menu screen,
select using the Up and Down buttons.
2. Select the desired mode using the Left and Right buttons.
SETUP
PRESETS NORMAL
EXPOSURE..
WDR MIDDLE
WHITE BALANCE ATW
DAY&NIGHT AUTO..
IMAGE ADJ..
※Select one of the following 5 modes, as appropriate.
● ATW : The ATW mode continuously monitors.
● INDOOR : Select when the colour temperature is between 4000˚K and 8500˚K
● OUTDOOR : Select when the colour temperature is between 2000˚K and 11000˚K
● AWB : To obtain the optimum state under the current luminance levels,
direct the camera to point toward a sheet of white paper and press the
SET button. If the environment changes, including the light source, the
white balance will require re-adjustment.
● MANUAL : Select to "fine-tune" the White Balance manually. Set White
Balance first using the ATW or AWB mode. Afterwards switch to MANUAL
mode, fine-tune the White Balance and then press the SET button.
MANUAL WHITE BALANCE
RED -18 -20 20
BLUE 13 -20 20
PREVIOUS PAGE..