Operation - Webb WEH18 Operator's Manual

Push rear roller cylinder lawnmower
Table of Contents

Advertisement

INSTRUCTION MANUAL

OPERATION

Before operating the machine, please ensure you are fully aware of the instructions, failure to do so,
could invalidate your manufacturer's warranty.
1. Walk briskly for maximum cutting power. The faster you walk, the better the mower will cut.
Never run!
2. For best results, place the lawnmower on the edge of the lawn, mow around the edge of the
lawn area, pushing the mower in front of you.
3. Then mow at right angles and at the end of each turn, slightly overlapping the previously cut
strip.
4. The next time you mow the lawn, try to work at right angles to the previous cut. This will help
prevent unevenness in the soil surface, which can build up if you always mow in the same
direction.
MOWING TIPS
Prior to any cutting, check the cutting area for any debris in advance. Remove stones, bricks, trash and
other debris which could cause damage to the cutting blade. If you hit debris, check the blades. If
damaged, refer to your nearest approved service dealer for assistance.
To maintain a healthy lawn and eliminate the mess created by very long grass, cut off no more than one-
third of the grass length as a time. If more than 1/3 of the length is removed, root growth will be impaired
and grass will be stressed, making your lawn susceptible to weed invasion, disease and poor appearance. If
your lawn gets too high, cut off 1/3 of the length, wait a couple of days and then cut off another third.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents