Table of Contents
Advertisement
5.7 - ENGINE STOP ACTIVATION COMMAND:
At this request, the system sends a confirmation message to the sender.
After engine is cut-off (vehicle stopped with GPS speed zero) the system will
send an SMS, to both numbers, indicating engine stop and vehicle position
(latitude; longitude; speed; time; date.).
5.8 - ENGINE STOP DEACTIVATION COMMAND:
When engine stop is deactivated, the system sends an SMS to the user to
confirm operation.
Engine stop can ONLY be deactivated by SMS.
5.9 -
SIM VALIDITY CHECK
Code "045" indicates the number of days after which the system will send a
message referring its status (selectable between 1 and 999 days).
This message is only forwarded to the 1st preset number and is useful to avoid
expiry of SIM card.
If no calls or recharges are made over a certain period, your provider could
block the SIM card.
Check your price plan and recharge your card balance if necessary.
To deactivate this function, set "000" (three zeros).
This message is only sent if ignition is turned ON (ignition key ON).
Therefore, if the system does not detect ignition or if the periodic position
control command is not configured, no message will be forwarded even if
stop#password#
go#password#
ATTENTION
!
pol#password#045
ATTENTION
!
the preset time period has elapsed.
COMMAND
(FREQUENCY
):
Hide quick links:
Advertisement
Table of Contents
