Messages From And To The System; Initial Configuration - Gemini 7892 MyMINI Installation And Use Manual

5.0 - MESSAGES FROM AND TO THE SYSTEM

Before configuring the module, familiarize yourself with all of the available
commands to interact with the system.
System management SMS (commands) are forwarded to the same mobile
from which they have been sent (except tracking and vehicle immobilization
confirmation messages).
Alarm messages are forwarded to the the preset mobile numbers.
The code for requesting vehicle speed, position and
3-digit number (default setting "000", three zeros).
If a text message is sent with a wrong command, the system will reply with
an error notification message (command error).
NB: The time given by the system is based on Greenwich Mean Time (GMT).
setup#password#version#main phone number#new
The initial configuration command must be sent to the tracker to notify
"password", system "model" and "number" to which alarm SMS must be
forwarded, where:
-setup#: configuration command.
-password#: password, factory set by Gemini ("000000", six zeros).
The new password
and letters ( i.e.: AA1234 or aa1234). The password is key-sensitive
therefore by typing characters other than the ones entered (upper and
lower case letters are not equivalent), the system will not operate properly.
Commands
-version#: system model (in this case MINI).
-main phone number#: number to which alarm SMS will be forwarded
preceded by the country code ( +44 for UK)
-new password#: user-chosen password (
-emergency phone number#: 2nd number to which alarm SMS will be
forwarded (optional, entering can be omitted).
When SMS is received, the LED blinks rapidly 5 times and the system replies:
setup ok with password=new password.
!
!

5.1 - INITIAL CONFIGURATION:

password#emergency phone number#
!
must be a 6-digit code and can contain both numbers
can either be sent with capital or small letters.
ATTENTION
ATTENTION
ATTENTION
.
6-digit code mandatory
must be a
SIM validity
).
always