Auxiliary Input Configuration - Gemini 7892 MyMINI Installation And Use Manual

18.0 -
The auxiliary negative input
According to the required connection
as indicated in the table below
The system is configured with the YELLOW/GREEN wire active 24/7,
negative input enabled to send generic alarm SMS to the 1st preset
COMMAND
aux#password#0
aux#password#1
aux#password#2
aux#password#3
aux#password#4
aux#password#5
aux#password#6
aux#password#7
Sending commands
program the system to forward an alarm message in case of ignition
detection (arming message must have been priorly sent, see chap. 5.11
AUXILIARY INPUT
(YELLOW/GREEN wire)
allows for many connections and configurations
.
ATTENTION
!
number.
ACTIVATION
Input active 24/7
Input only active
when system is armed
Input active 24/7
Input only active
when system is armed
System activation
System activation
System activation
System activation
ATTENTION
!
aux#password#1
and 8.0).
CONFIGURATION
, program the input (by sending an SMS)
Positive (lack of negative)
Positive (lack of negative)
Negative pulse activates the
system (60" arming delay),
negative pulse deactivates the
Positive pulse activates the system
(60" arming delay), positive pulse
deactivates the system
Continuous negative presence
activates the system (60" arming
delay), lack of negative deactivates
Continuous lack of negative
activates the system (60" arming
delay), continuous negative
presence deactivates the system
and aux#password#3
SIGNAL
Negative
Negative
system
the system
will