Table of Contents
Advertisement
6.0 - MESSAGES TO AND FROM THE TRACKER
ATTENTION
ATTENTION
!
!
If a text message is sent with a wrong password or a wrong format, the
Command error
tracker will reply:
The tracker communicates events and responds to commands exclusively via
SMS.
All outgoing messages,with the sole exception of setting requests, will include
the following information:
1. Type of event:
Alert, notification or response to a received command.
2. System status:
Armed, partially armed or disarmed.
3.
GPS status
:
GPS OK (if there is a GPS fix) or NO GPS.
4. Speed:
km/h
5. Date:
dd/mm/yy
6. Time:
Greenwich Mean Time (GMT)
7. Google Maps link:
Clickable link for real-time location on a map.
*
The system status is only provided in the "ARMING", "PARTIAL ARMING"
and "DISARMING" text messages.
6.1 - SYSTEM TOTAL ARMING COMMAND:
on,password
When the engine is OFF and the tracker receives the arming command it will
execute the command and reply:
System on, GPS
status
, speed, date, time, Google Maps
on
command received
If ignition is ON it will reply:
It will execute the command and send the confirmation message as soon as
the engine is turned OFF.
6.2 -
PARTIAL ARMING COMMAND:
on par,password
When the engine is OFF and the tracker receives the partial arming command, it
will arm without enabling the motion sensor and reply:
mode, GPS status, speed, date, time, Google Maps link
on par command received
If ignition is ON it will reply:
It will execute the command and send the confirmation message as soon as
the engine is switched OFF.
PAGE 6
Upon request, the system will disarm and reply:
System off,
When the tracker receives a real-time location query it will report the vehicle
current position:
NB: If the engine is OFF, the speed in the text message will be 0 km/h.
*
When the tracker receives a tracking query it immediately reports the vehicle
current position and then sends 5 other updates upon both the pre-set time and
distance.
Tracking,
If the tracker does not have a valid GPS fix when it receives the tracking
request (ex. vehicle parked in a covered structure), it will report the last visible
position and then send another SMS once a position fix is acquired.
link
When the engine is OFF and the tracker receives the "Area ON" command, it
will enable the motion sensor and reply:
Geo activated, GPS status, speed, date, time, Google Maps link
When the tracker receives the "Area OFF" command, it executes the command
and replies:
Geo deactivated, GPS status, speed, date, time, Google Maps link
System on-partial
When the tracker receives a system status request, it replies to both preset
numbers:
System status (armed, partially armed, disarmed), GPS status,
speed, date, time, Google Maps link
6.3
- DISARMING
COMMAND
off,password
GPS status, speed, date, time, Google Maps link
6.4 - VEHICLE LOCALIZATION
loc,password
Loc,
GPS status, speed, date, time, Google Maps link
6.5
-
TRACKING COMMAND
(VEHICLE IN MOTION):
track,password
The track interval is 90 sec. and 1000m, both
GPS status, speed, date, time, Google Maps link
6.6 - GEOFENCE COMMAND:
Area ON,password
Area OFF,password
6.7 - SYSTEM STATUS REQUEST:
stat,password
:
COMMAND
:
conditions
must be met:
PAGE 7
Advertisement
Table of Contents
