REQUEST
Initial configuration and/or
data modification
Initial configuration and/or
data modification with STOP
& GO activation
Initial configuration and/or
data modification with STOP
& GO deactivation
Vehicle
location
Tracking (vehicle displacement)
Speed control
Engine stop activation
Engine stop deactivation
SIM validity check
Periodic position control
System arming
System disarming
System status
Auxiliary input setup (AUX)
Indicative value, factory set by Gemini, for the speed limit (expressed
(Ref.01)
in km/h, always 3 digits
Indicative value, factory set by Gemini, for the time interval after which
(Ref.02)
a message must be sent (expressed in days, always 3 digits .
Indicative value, factory set by Gemini, for the time interval after which
(Ref.03)
vehicle position must be checked (expressed in minutes, always 3 digits).
see chapter 18.0.
(Ref.04)
9.0 - WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT
The present device does not fall within the scope of Directive 2002/96/EC on
Waste Electrical and Electronic Equipment (WEEE) as specified in art. 2.1 of
L.D. no. 151 of 25/07/2005.
8.0 - MESSAGE OVERVIEW
setup#password#version#main phone
number#new password#emergency phone
setup#password#version#main phone
number#new password#emergency phone
setup#password#version#main phone
number#new password#emergency phone
).
(WEEE) DIRECTIVE
COMMAND
number#
number#f#
number#s#
loc#password#
trk#password#
speed#password#060
stop#password#
go#password#
pol password#045
#
pos#password#180
on#password#
off#password#
status#password#
aux#password#n
(ref.01)
(ref.02)
(ref.03)
(ref.04)
)