3Com 6200 Hardware And Software Users Manual page 31

Interface Connections and First Time Start-Up
3COM Security Switch 6200 Hardware and Software Users Guide
11. Configure NTP to achieve time synchronization.
Synchronizing the system's clock with an accurate
source is important for proper correlation of security
events. The system uses the Network Time Protocol (NTP)
to achieve time sychronization. The IP address of an
NTP server must be specified.
NTP Server
==========
Add NTP Server <Y or N>[Y]:
Enter NTP Server IP Address [0.0.0.0]:
======================================================
Congratulations, you have finished the Interview.
To activate your interview settings, you MUST reboot
the system using the following command at the prompt:
# reboot
Exiting the Interview...
======================================================
3-13