Restoring The System To Factory Default Settings; Getting Help Within The Configuration Tool - 3Com 6200 Hardware And Software Users Manual

Configuring the Security Switch 6200 System
Restoring the
system to
Factory
Default
Settings
Getting Help
Within the
Configuration
Tool
3COM Security Switch 6200 Hardware and Software Users Guide
></data>
</vrrp>
To delete the current configuration and return the system to its factory
defaults, use the following command at the admin prompt.
NOTE: The IP address of interface Management 1, telnet, and the default
gateway are left in tact. This done in the event you telneted into the box.
[admin@xxxxx bin]$ ./cos_reset_system
To receive help from within the system Configuration Tool, use the following
command at the admin prompt.
[admin@xxxxx bin]$ ./cos_show_system --help
The following options can be used within this Help system:
cos_show_system [OPTION...]
-v, --version - displays the current configuration tool
version number.
-h, --help - displays the configuration tool's help
system.
-f, --file=STRING - displays the configuration output
file. The default value is stdout.
-d, --default - tells the Help system to include
default values.
4-25