3Com 6200 Hardware And Software Users Manual page 28

Interface Connections and First Time Start-Up
3-10
4. Select a region.
1) Eastern Time
2) Eastern Time - Michigan - most locations
3) Eastern Time - Kentucky - Louisville area
4) Eastern Time - Kentucky - Wayne County
5) Eastern Standard Time - Indiana - most locations
6) Eastern Standard Time - Indiana - Crawford County
7) Eastern Standard Time - Indiana - Starke County
8) Eastern Standard Time - Indiana - Switzerland County
9) Central Time
10) Central Time - Michigan - Wisconsin border
11) Central Time - North Dakota - Oliver County
12) Mountain Time
13) Mountain Time - south Idaho & east Oregon
14) Mountain Time - Navajo
15) Mountain Standard Time - Arizona
16) Pacific Time
17) Alaska Time
18) Alaska Time - Alaska panhandle
19) Alaska Time - Alaska panhandle neck
20) Alaska Time - west Alaska
21) Aleutian Islands
Enter choice <1 - 21>:
5. Define the Management Services.
Management Services
===================
Several methods are available for managing your system
through the 10/100 Ethernet interface on the host.
Select the desired management services.
Enable Telnet Server <disabled, enabled>[enabled]:
Enable FTP Server <disabled, enabled>[enabled]:
Add DNS Lookups <Y or N>[N]:
DNS Server IP Address [0.0.0.0]:
6. Configure the SNMP parameters.
Configure SNMP Network Management <Y or N>[N]:
Enabling SNMP ...
Enable SNMP Network Management <disabled, enabled>
[disabled]:
Enter SNMP Contact []:
Enter SNMP Location []:
The SNMP community string is the access string to
permit access to the SNMP protocol. A read-only "ro" or
read-write "rw" access may be specified. By default,
SNMP community string permits read-only access.
3COM Security Switch 6200 Hardware and Software Users Guide