Configuring Physical Interfaces - 3Com 6200 Hardware And Software Users Manual

Configuring the Security Switch 6200 System
Configuring
Physical
Interfaces
4-10
SNMP Traps
==========
Destination
10.2.1.48
Change the SNMP Trap Destinations <Add, Delete, Modify
or eXit>[eXit]:
7. Enter the desired option or enter X to return to SNMP
Configuration Menu.
SNMP configuration
==================
1) SNMP Server
2) Communities
3) Trap Destinations
X) Exit
8. Enter the desired option or enter X to return to the main menu.
There are three types of physical interfaces on the system: management,
gigabitethernet, and fastethernet. The management interfaces allow you to
manage the configured interfaces.
To configure the physical interfaces:
1. Select Option 6 from the main menu.
Physical Interfaces
===================
Interface
management 1
management 2
fastethernet 1
fastethernet 2
fastethernet 3
fastethernet 4
fastethernet 5
fastethernet 6
fastethernet 7
fastethernet 8
fastethernet 9
fastethernet 10
fastethernet 11
fastethernet 12
fastethernet 13
3COM Security Switch 6200 Hardware and Software Users Guide
Port Type
162 trap
MAC Address
(Configured)
00:03:47:f1:aa:52 (N) on
00:03:47:f1:aa:53 (N) on
Version Community
SNMPv1 foobar
Auto Duplex Speed
neg
half
half
(N) on half
(N) on half
(N) on half
(N) on half
(N) on half
(N) on half
(N) on half
(N) on half
(N) on half
(N) on half
(N) on half
(N) on half
(N) on half
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10