3Com 6200 Hardware And Software Users Manual page 60

Upgrading the System Software
5-2
7. Once the above command completes, enter the following command at
the root prompt:
chmod 700 cos-upgradepack-ocode-AZZZ-Y.Y.Y-Y-X.X.X-
X.shar
8. Once the above command completes, enter the following command at
the root prompt:
./cos-upgradepack-ocode-AZZZ-Y.Y.Y-Y-X.X.X-X.shar
Answer "Y" when this command prompts you.
NOTE: Once this action completes successfully, your system software is
upgraded.
You may notice "Exec'ed Program Error" being displayed on your screen
during the upgrade process if upgrading from a release prior to 2.1.3. Please
ignore these error messages. Your system will still be upgraded properly
9. Reboot your system.
3COM Security Switch 6200 Hardware and Software Users Guide