Sustain Pedal Assignment; Sustain Pedal As A Stop Change - Rodgers Grande Double Harpsichord Owner's Manual And Technical Documentation

SUSTAIN PEDAL ASSIGNMENT:
The sustain function is enabled for both maIluals when the instrument is
turned on.
FOR THE UPPER MAJ'.fUAL:
1. Hold the temperament button and press the OBOE button.
Pressing the button will cause tIle light of the OBOE to flash
if the upper manual is assigned to the sustain pedal.
2. To disable this sustain functioll on the upper manual, Iloid the
Temperament button and then press the OBOE button.
FOR THE LOWER MANUAL:
1. Hold the temperament button and press tIle COUPLER
button. Pressing the button will cause the light of the
COUPLER button to flasll if the lo\ver manual is assigned
to the sustain pedal.
2. To disable this sustain function on the lower manual, 110Id the
Temperament button and press the COUPLER button.
SUSTAIN PEDAL AS A STOP CHANGE:
The sustain pedal can be used to change between two stop set-ups.
To set the stops:
1. Hold the TRANSPOSER button and press the COUPLER and
OBOE buttons. The lights will stop flashing. This sets
thefirst
toggle position.
2. Next, Hold the TRANSPOSER button and press the COUPLER
and OBOE buttons. The lights will stop flashing. This sets the
second toggle position.
3.l:Jow for each press of the SUSTAIN pedal, you can set the desired
stop setup. Stop changes can be made anytime while in this mode.
5