Table of Contents
Advertisement
SAVING STOP SETUPS:
The harpsichord has a stop savillg featllre tllat allows different stop
set-ups to be saved in banks. Tllese stop banks will be emptied when
the unit is turned off. There are four stop storage banks,
FI and F61
on each manual.
1. To save a stop setup:
a. Press and hold the transposer button.
b. Press one of the four keys.
2. To return to the key-play mode:
a. Press and hold tIle transposer butt011.
b. Press the memory-key TWICE. Now the key will be taken
out of the memory mode.
AUTO TUNING:
The instrument will be in the pitch that is set by the tuning knob when
turned on.
To change the master tuning :
1. Hold the transposer and select the desired tuning by
selecting one of the five buttons in the IO'Ner manual sectioll.
This will force the master tuning to a standard value.
a. 8'1
IS
A-415
b.
8'11
IS
A-435
c. 8'+8'
IS
A-440
d.
8'+4'
IS
A-444
e.
Lute
IS
A-450
2. The tuning knob located on the output panel will assume
control if moved. This will allow the various tunings to be
altered.
REVERB:
The reverb simulates two sizes of rooms: a small room marked
ROOM and a large room marked HALL. Selection is made by
selecting the desired reverb button. The amount of reverb is controlled
by the LEVEL knob.
4
Advertisement
Table of Contents
