An experienced installer should perform the installation. Improper installation may result in property damage, severe injury or death.
Read the entire manual before proceeding with the installation.
Eagle Access Control Systems, Inc. is not responsible for researching and complying with local building codes. Be sure to check all local
building codes before installation.
FRONT Position
Standard method of installation.
NOTE: FRONT installation can be mounted on a
concrete pad or post mount, see page 9.
Proper FRONT Chain Position
4.5"
8" Min
Correct
8"
Chain
Bracket
Height
AVI Slide Rev - C
METHODS OF INSTALLATION
AVI
POWERED BY EAGLE
Top View
Operator and chain
MUST be parallel to gate!
Chain bracket MUST align
with idler wheels!
Chain brackets MUST be
mounted so the chain
remains the same height
as it is on the idler wheels!
NOTE: Make sure safety guidelines are
followed on pages 4-6 for installation.
COMMON MISTAKES
TO BE AWARE OF:
Gate
Operator and
NO
NO
chain are NOT
parallel to gate.
Gate
Idler Wheels
Chain
Chain bracket
Bracket
does NOT
NO
NO
align with
idler wheels.
AVI
POWERED BY EAGLE
NO
NO
Chain brackets
Chain
brackets
positioned
too high.
positioned
too low.
7