Input Alarm; System Alarm; Alarm Out - Bosch DIVAR 2000 Operation Manuals

DIVAR 2000 / DIVAR 3000 / DIVAR
5000
6.4.3

Input alarm

See Alarm > Motion detect for a description of applicable fields.
6.4.4

System alarm

Use tabs in this menu to setup how the system reacts to different system alarms (HDD,
Network, Temperature, Other).
HDD
– Enable: select to enable the system event chosen in the following field.
– Event type: choose from
–
–
–
– Alarm out: select the alarm activation output port(s) (maximum of 3 on DIVAR
2000/3000; 6 on DIVAR 5000).
– Latch: set a delay time (from 10 seconds (default) to 300 seconds) before the system
automatically turns off the alarm and the activated output after the external alarm is
cancelled.
– Send email: system will send an email to alert you when an alarm occurs.
– Show message: system will pop up a message on the local screen to alert you when an
alarm occurs.
– Buzzer: the buzzer alerts you when an alarm occurs.
– Alarm when disk is full for xx %: (this option is only shown for the event 'Disk full';
default is 80%).
Network
– Enable: select to enable the system event chosen in the following field.
– Event type: choose from
–
–
See above for a description of other fields.
Temperature
Enable: select to react to a temperature alarm.
See above for a description of other fields.
Other
Enable: select to react to other alarms (e.g. battery error).
See above for a description of other fields.
6.4.5

Alarm Out

Assign here the settings for each of the available alarm outputs or use the 'All' checkbox to
select all outputs:
– Automatic control: Set the alarm to react to an automatic input.
– Activate manually: Set the alarm to react to a manual input.
– Deactivate manually: Turn off the alarm outputs for schedule and manual.
– Alarm status: displays the current status of the external alarm (a checked box means the
alarm is activated)
– Deactivate alarms: Click this button to turn off the alarm settings.
Bosch Security Systems
Disk full
No HDD
Disk error
Network lost (disconnected)
IP conflict
Operation Manual
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
Settings | en 41
2016.09 | v1.0 | AM18-Q0717