Recording Settings; Day Period; Weekend; Rec Day - Bosch Divar -Digital Versatile Recorder Installation Instructions Manual

Divar | Installation Manual | Quick install
>> RECORDING SETTINGS

RECORDING SETTINGS

DAY PERIOD

WEEKEND

REC DAY

REC WEEKEND/NIGHT

ENABLE ALARM INPUTS FOR

ALARM INPUT RECORDING

ENABLE MOTION FOR

MOTION RECORDING

APPROX. REC. DURATION
>> DAY PERIOD
• Fill in a start time and an end time to define the period during which the
day profile is active.
• The weekend/night profile is active for the rest of the 24-hour period.
>> WEEKEND
• When a day is defined as a weekend day, then the weekend/night profile
is active that whole day.
• Define the weekend as either Saturday and Sunday or just Sunday.
• Select none if you wish the weekend to be the same as the other days of
the week.
>> REC DAY
• Select the normal recording speed to be used for each of the activated
cameras during the day profile.
• The Images Per Second (IPS) rates available for PAL range from Never,
0, 1/10 (one image every 10 seconds), up to 25 IPS.
• The Images Per Second (IPS) rates available for NTSC range from Never,
0, 1/10 (one image every 10 seconds), up to 30 IPS.
Bosch Security Systems
8:00 18:00
SAT AND SUN
1 IPS/CAM
2 IPS/CAM
DAY/NIGHT
12.5 IPS/INPUT
NIGHT
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
5 IPS/CAM
036 HOURS
• Set the recording speed to NEVER to not record a camera at all. No pre-
alarm recording is done and the camera cannot be viewed over the
network.
>> REC WEEKEND/NIGHT
• Select the normal recording speed to be used for each of the activated
cameras during the weekend/night profile.
• The Images Per Second (IPS) rates available for PAL range from Never,
0, 1/10 (one image every 10 seconds), up to 25 IPS.
• The Images Per Second (IPS) rates available for NTSC range from Never,
0, 1/10 (one image every 10 seconds), up to 30 IPS.
• Set the recording speed to NEVER to not record a camera at all. No pre-
alarm recording is done and the camera cannot be viewed over the
network.
>> ENABLE ALARM INPUTS FOR
• Select the profiles during which alarm inputs are enabled.
• Choose day only, weekend/night only, both day and weekend/night or
none.
>> ALARM INPUT RECORDING
• An activated input alarm can increase the recording speed of a camera.
Select the recording speed to be used when an input is activated.
• The camera with the number that corresponds to the alarm input
number is recorded at the speed you set.
>> ENABLE MOTION FOR
• Select the profiles during which motion events are enabled Choose day,
weekend/night, both day and weekend/night or none.
• Press the camera keys to select or deselect the cameras for which motion
should be enabled. A check mark means enabled.
>> MOTION RECORDING
• A camera can be recorded at an increased recording speed when motion
is detected. Select the recording speed to be used for each of the cameras
when motion is detected.
EN | 2-5