DIVAR 2000 / DIVAR 3000 / DIVAR
5000
6.3
Camera
6.3.1
Detection
This screen shows a list of cameras connected to the DIVAR, IP and/or analog (see Device
list). If required, cameras can also be added automatically with <Device search> or manually
with <Manual add>. Do this as follows:
1. Click <Device Search> to search for any newly connected cameras (analog cameras
connected to hybrid recorders and IP cameras connected to PoE ports are already
automatically shown).
2. Select the required cameras in the Search list and add to Device list by clicking <Add> (or
double click a camera).
3. Selected cameras appear in the Device list (if required, Modify or Delete a camera by
selecting the appropriate function).
6.3.2
Configuration
General
Assign here for each channel the camera identification fields.
Overlay
Cover area: Select to set a privacy mask (concealed area) on the display.
To set the mask area:
1. Select the required masks from the selection [1], [2], [3], [4].
2. Press <Set> and use the mouse to drag a mask over the area to be concealed. Enlarge or
shrink the mask as required.
3. Select and drag a new area as required (system supports max 4 masks per channel).
PTZ
The pan/tilt/zoom setup includes the following items.
–
Channel - select first the applicable channel (these settings can later be copied to other
channels using <Copy>.
–
PTZ type: Choose Remote or none.
After completing setup, click <Save> to go back to the previous menu.
For a detailed description of how the PTZ is operated, please refer to PTZ.
The Copy function allows you to quickly copy one channel setup to more channels (or all
channels). This obviously saves repeating common settings for each channel. The channel
setups that can be copied are:
–
Schedule
–
encoder
–
Alarm
–
Detect
–
Pan/Tilt/Zoom
For example:
1. After setting values in the "Encoder" or "Schedule" screen for channel 1, click <Copy> to
go to the Copy screen.
2. Check the currently copied channel name is highlighted (for example, channel 1).
3. Now select the channel(s) to paste to, e.g. channel 5, 6 and 7. (If you want to save the
current setup of channel 1 to all channels, click the box All.)
4. Click <OK> to save the copied setup.
5. Click <OK> in the Encoder or Schedule screen to complete the copy function.
Bosch Security Systems
Operation Manual
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
Settings | en
37
2016.09 | v1.0 | AM18-Q0717