Supermicro X11SSN-H/-E/-L User Manual page 46

X11SSN-H/-E/-L User's Manual
Force Power On
Use jumper JPF1 to select the FORCE POWER ON function when the AC power cord is
plugged in. When enabling force power on and AC power recovery, the system will boot up
automatically without pressing the power button.
Manufacturing Mode Select
Close JPME2 to bypass SPI flash security and force the system to use the Manufacturing
Mode, which will allow you to flash the system firmware from a host server to modify system
settings. Refer to the table below for jumper settings.
FAN1
JHDMI1
JPW2
1
JPF1
JLCDPWR1
JCOM1:
COM1 COM2
Force Power On
Jumper Settings
Jumper Setting Definition
Force Power On (Default)
Pins 1-2
(when AC power cord is plugged)
PWR BTN Power On
Pins 2-3
(when AC power cord is plugged)
Manufacturing Mode
Jumper Settings
Jumper Setting Definition
Pins 1-2 Normal (Default)
Pins 2-3 Manufacturing Mode
B2 B11
A12 A1
A4 A1
USB6(3.0)
A5 A9
B1
DP
B9
B5
USB4/5(3.0)
SRW1 SRW2
SRW3 SRW4
JCOM2:
COM3 COM4
JPH1
46
1. Force Power On
2. Manufacturing Mode
2
JD1
B1
JF1
B2
B11
A14
LAN2 LAN1
JGP1
PWR ON
RST
JF1
HDD LED
PWR LED
J2
J3
AUDIO FP
J4
I-SATA1
BT1