Trouble Codes - Sharp MX-M266N Manual

SHARP
A0
01 PCU ROM abnormality
02 SCU ROM abnormality
15 Incompatible DSK Boot and program
firmware version
17 UI data & CPU firmware inconsistency.
20 Firmware & EEPROM conflict (MFP)
21 Firmware & EEPROM conflict (PCU)
22 Firmware & EEPROM conflict (SCU)
CE
00 Network communication error
01 Network card is not installed or defective
02 FTP or Mail server is not found
03 Specified server does not correspond
during transmission
04 Invalid account/password (FTP server)
05 Invalid directory entered (FTP server)
06 Specified mail server (POP3) is not found
07 Invalid server account or password
08 Specified mail server (POP3) suspends
response
E7
01 MFP image data trouble.
03 HDD trouble.
04 HDD-ASIC error.
07 SD Card error
10 Shading trouble (Black correction).
11 Shading trouble (White correction).
14 CCD-ASIC communication error.
20 LSU laser detection error (Black).
21 LSU LD deterioration trouble.
28 LSU control ASIC connection error.
49 Watermark data error
50 Firmware & PWB combination error
60 MFP combination error (Firmware/PWB)
61 MFP-PCU combination error
62 MFP-SCU combination error
65 MFP EEPROM sum check error
80 MFP-SCU communication trouble.
90 MFP-PCU communication trouble.
91 Fax reception image data error
92 Copy image data error
93 Copy, Image send, Filing, Print image data
process error.
94 Image file data process error (when
importing filing data).

TROUBLE CODES

E7
96 MFP PWB DIMM memory check error.
EE
EL Auto DV adjustment trouble
EU Auto DV adjustment trouble
F1
00 Finisher - PCU PWB communication error
03 Finisher paper exit roller lifting trouble
10 Staple motor trouble
15 Finisher paper exit tray lift trouble
19 Finisher alignment operation trouble F
20 Finisher alignment operation trouble R
29 Finisher cooling fan motor abnormality
37 Finisher data backup RAM error.
50 Finisher incompatibility trouble.
95 Paper exit option configuration error
F2
39 Process temperature sensor trouble
40 Toner density sensor trouble
58 Temperature/humidity sensor trouble
64 Toner supply operation trouble
70 Improper toner cartridge detection
74 Toner cartridge CRUM error
F3
12 Paper feed tray 1 lift up trouble
22 Paper feed tray 2 lift up trouble
32 Paper feed tray 3 lift up trouble
42 Paper feed tray 4 lift up trouble
F6
00 MFP-Fax communication trouble
01 Fax EEPROM read/write error.
04 Fax modem operation trouble.
21 LIU & Fax soft switch error (combination)
30 Access error to 1-chip on Fax board.
97 Fax PWB compatibility trouble.
98 Improper Fax & Destination information.
H2
00 Thermistor open trouble (TH_UM)
01 Thermistor open trouble (TH_US)
(over toned).
(under toned).
31