Cycling Between Servers - Cyclades AlterPath KVM 16 Manual

If the port is already connected to another station, the system displays the
following message:
Select the appropriate action to continue.

Cycling Between Servers

Cycle refers to the capability to access or connect from one authorized server
to another. There are two ways in which you can cycle between servers:
Cycle by Server
Cycle by Server (or automatic cycling) enables you to view all authorized
servers on a continuous basis until all servers have been exhausted and then
start over again.
To initiate cycling by server, perform the following steps:
1. From the Main Menu, choose Connect and press <Enter>.
AlterPath KVM Manual
• Cycle by Server (automatic)
• Cycle by Key Sequence (manual)
The system brings up the Server Selection Menu:
5:
AlterPath KVM Operation
5-7