Cyclades AlterPath KVM 16 Manual page 152

4: KVM Web Configuration
To configure SNMP:
1. From the top menu bar, select Networks; from the left menu panel, select
2. Type in the following System Information, as necessary:
3. To Add an SNMP agent using SNMPv1/SNMP2 Configuration, select the
4-60
SNMP Daemon Settings.
The system invokes the SNMP Daemon Settings form:
Field Name
Community
SysContact
SysLocation
If you are using SNMPv3, skip steps 2 and 3; proceed to step 4.
Add button located at the bottom of this view table.
Definition
The community name acts as a password to
authenticate messages sent between an SNMP cli-
ent and a router containing an SNMP server. The
community name is sent in every packet between
the client and the server.
The email of the person to contact regarding the
host on which the agent is running (e.g.,
me@mymachine.mydomain)
The physical location of the system (e.g., mydo-
main).
AlterPath KVM Manual