Microcode Update - Cyclades AlterPath KVM 16 Manual

Microcode Update

Through an FTP server, the Microcode form is used to update any of the
micro controller microcodes that are stored separately in each of the
following target locations:
To update a microcode:
1. From the top menu, select Management; from the side menu, select
2. Complete the input fields as follows:
AlterPath KVM Manual
• KVM Terminator
• KVM Switch (internal)
• KVM Main
• KVM Local
• KVM Video Compression Module
Microcode Update.
The system brings up the Microcode form:
Field Name
Target
Definition
The specific KVM microcode that you wish to
update (i.e., KVM Terminator, KVM Switch
(internal), KVM Main, and KVM Local).
4: KVM Web Configuration
4-77