Step 3: System Log - Cyclades AlterPath KVM 16 Manual

4: KVM Web Configuration

Step 3: System Log

The System Log form is used to assign or add syslog servers to external server
locations. These servers receive KVM syslog messages. You can also delete
the servers from their locations.
1. Select Step 3: System Log from the main menu.
To Add a Syslog Server
1. From the Facility Number dropdown list, select the facility number from
2. From the New Syslog Server field, enter the IP address of the syslog
3. Select Apply Changes to save your configuration.
To Delete a Syslog Server
1. From the Facility Number dropdown list, select the facility number from
4-14
The system brings up the System Log form:
which you want to configure your syslog servers.
server that you are adding, and then select the Add button. (Repeat this
step for as many servers you need to add.)
The new server appears in the Syslog Servers list box.
which you want to configure your syslog servers.
AlterPath KVM Manual