Cyclades AlterPath KVM 16 Manual page 162

4: KVM Web Configuration
To configure the KVM boot settings:
1. From the top menu bar, select Configuration; from the left menu panel,
2. Complete the fields as follows:
4-70
under System, select Boot Configuration.
The system brings up the Boot Configuration form:
Field Name
IP Address assigned to
Ethernet
Watchdog Timer
Unit boot from
Boot Type
Boot File Name
Server's IP Address
Console Speed
Flash Test
Definition
As indicated.
Sets the Watchdog Timer to Active or Inactive.
Specify whether to boot unit up from Flash or
from the Network.
Select from the following types of booting: bootp,
tftp, or both.
Filename of the boot program you want to use.
As indicated.
Select from: 4800 through 118200.
Select this to test boot from the Flash card. You
can Skip this test, or do a Full test.
AlterPath KVM Manual