Intel Aero Hardware Manual page 4

Revision History
Revision Description
Number
1.0 Initial release
1.5 Updated the block diagram (Figure 1)


Updated the voltage input requirement section 3.6.1
Added CAN bus pin assignments to the table in section 3.7.1
Added a new section discussing the Intel
which is assembled with the Intel
inside the Intel
1.5.1
Corrected reference to chip selects in body of text 3.7.1 to
match the block diagram in Figure 1
1.5.2 Corrected CPU kernel GPIO # and pin assignments in sections
3.7.1 and 3.7.2.2
Updated URL references throughout the document
Eliminated one subsection in section 5 that was sufficiently
addressed in 5.1
Corrected the pin numbering for the 80-pin IO Expansion
Connector in Figure 2 and Figure 7
Corrected SPI1 chip-select assignments CS-0 and CS-1
Added detail for Intel ® Aero Flight Controller interfaces
® Aero Ready to Fly Drone (section 6)
4
® Aero Flight Controller
® Aero Compute Board
Revision Date
February 2017
July 2017
February 2018
April 2018