Recording A Video - Vimtag P1 User Manual

VIMTAG SURVEILLANCE SOLUTION USER GUIDE
To set up the first scheduled recording:
1. Click Schedule 1.
2. Select the days of the week that you want to record. In addition to
specifying specific days, you can also select All to configure the
system to record every day of the week.
3. Select the beginning and ending times. The system uses a 24-hour
clock. If you want to record from midnight to 5AM, for example, you
would enter 00:01 as the start time and 05:00 as the end time. If you
wanted to record from noon to 5PM, you would enter 12:00 to 17:00.
Keep in mind that you can add minutes as well, so you could record
from 13:00 to 18:43.
If you want to create another schedule after you have made your first,
click Schedule 2 and repeat the process. Continue for Schedule 3 and
Schedule 4, if needed. Once you have configured all of your schedules,
click Apply.
Note: To ensure that the recordings are made at the correct time, it is
important to verify that the time on the camera is set properly.

Recording a Video

There are several different ways to begin videotaping the viewing area.
These include:
Page
45