Storage Options - Vimtag P1 User Manual

VIMTAG SURVEILLANCE SOLUTION USER GUIDE
Note: The camera device ID is not the Nickname you may have assigned
to the camera but the actual device ID number assigned by Vimtag. You
can see the device ID on the Settings page in the About option.
Date/Time
In the Date/Time tab, you can set the date and time for your camera.
Choose the date, time, and the time zone. You can also choose to
synchronize to the local date and time automatically. However, you can
change the time manually if you prefer. You will want to have the correct
date and time so you can schedule your recordings correctly.
Note: On mobile devices, to change your time zone, you need to first
turn the Auto sync off. On a computer, you can change the time zone
even while the Auto sync is on, however you cannot change the time
manually, unless you first turn the Auto sync off.

Storage Options

SD Card
The SD Card section indicates whether you have an SD card in the camera
and whether it is enabled.

To use the SD card, place it into the slot on the back of the camera. If
the card does not go in all the way by pushing it with your finger, you
Page
39