Vimtag P1 User Manual page 43

VIMTAG SURVEILLANCE SOLUTION USER GUIDE
Select the Motion Detection tab to determine how sensitive the camera
is when it comes to sensing motion. You can change the sensitivity
If you place the settings too high, you could get a number of false alarms.
If you lower the settings too much, it might not provide you with accurate
results. Therefore, it is recommended that you first start with the default
settings, which should provide optimal coverage.
You can also select what you want the camera to do if motion is detected.
For example, you can configure the camera to take a snapshot, or to start
recording a video automatically.
The I/O Alarm is for external devices connected to the camera. This
setting is not commonly used.
When finished, click Apply to save your changes, and then Click Turn alert
on. Toggle the Turn alert off button to Turn alert On.
On the Android and iPhone app, whenever there is a motion alert, it will
send you an alarm and you can sign in to see what is happening or what
happened and was recorded (depending on what you configure the
camera to do).
Notifications are only sent via mobile devices. This means that if you are
logged on with your mobile device and your computer, you will receive
notifications on your mobile device only. Although you will not receive a
notification on your computer, snapshots and recordings will still be saved
and available for viewing via the History pages.
settings for day and night
operation separately to improve
motion detection.
Note: It is recommended that
you start with the default
settings and then alter them as
needed to adjust to the
conditions in the viewing area.
Page
42