Vimtag P1 User Manual page 45

VIMTAG SURVEILLANCE SOLUTION USER GUIDE
Schedule Recording Times
Under the Schedule Recording tab, you have the ability to enable
recordings based on two different options: 24/7 and Scheduled. You
should enable one of these options if you wish to schedule recording
times automatically.

24/7 - You will be recording around the clock.

A Scheduled Recording gives you control over the times that you
actually record by scheduling a specific times. You will be able to
schedule up to four different recording sessions.
For each schedule, you can set a beginning time and an ending time, and
specify the days of the week. The system uses a 24-hour clock, in
sequential order up to 23:59. This means, that if you want to record from
midnight to 5:00 AM, for example, you would enter 00:01 as the start
time and 05:00 as the end time. If you want to record from noon to 5:00
PM, you would enter 12:00 to 17:00. However, if you wish to record from
20:00 to 3:00 (8:00 PM to 3:00 AM), you will need to specify two
schedules:

From 20:00 to 23:59

From 00:01 to 3:00
Note that it is possible to specify in increments of one minute, such that
you can also record from 13:15 to 18:43. Once you have configured all
of your schedules, click Apply.
Page
44