Table of Contents
Advertisement
2.0
Safety instructions
Read this manual carefully before using
the system!
Please follow the instructions and procedures described in
this manual. They are designed so that you get the most
out of your pressure system and avoid any personal
injuries and/or damage to the system.
Warning......
About the handling:
•
Avoid knocking, bumping or dropping the pressure
system. This can cause permanent damage to the
system and loss of accuracy.
About the use:
•
The pressure system must not be used for any
purposes other than those described in this manual and
for any application other than precision pressure
calibration jobs.
•
The pressure system should only be used by TRAINED
PERSONNEL.
•
Never subject the pressure gauges to overpressure. In
case of overpressure the gauge should not be used for
calibration purposes.
•
None of our calibration systems are cleaned or
prepared for OXYGEN MEDIUMS so DO NOT USE our
systems for this purpose.
•
Do not disconnect any parts from the system when
pressurised.
•
Do not connect any external pressure source to this
system. This system is designed to test pressure
measuring devices connected to the manifold only.
Pressure from an external source can result in
explosion of the liquid reservoir and possible personal
injuries.
6
18-06-2008
126682
00
Hide quick links:
Advertisement
Table of Contents
