Errors - Ametek T-620 User Manual

5.0

Errors

Generally the JOFRA Pressure Calibration System is manufactured
for field use and will normally cause no problems for the user.
Note...
AMETEK Denmark's liability ceases if:
•
parts are replaced/repaired using spare parts which are
not identical to those recommended by the manufacturer.
•
non-original parts are used in any way when operating
the system.
AMETEK Denmark's liability is restricted to errors, which
originated from the factory.
The questions and answers in the following schedule are based on
the use of an indicator with a pump system.
126682 00 18-06-2008 15