Returning The Jofra Pressure Calibration System For Service - Ametek T-620 User Manual

6.0 Returning the JOFRA Pressure
Calibration System for service
When in need of service please contact your local distributor for
advice or return the system to the manufacturer.
For all pressure systems, the pump and the indicator are separate
systems. Therefore, a replacement of the pump does not mean that
the complete system has to be sent in for repair.
Recalibration of the unit can be performed locally with an accurate
pressure reference : No need to send the unit back to the
manufacturer for recalibration. If a factory calibration is required, the
pump and indicator are independent and only the indicator needs to
be returned.
When returning the Pressure Calibration System to the manufacturer
for service, please enclose a fully completed service information form.
Simply copy the form on the following page and fill in the required
information.
The Pressure Calibration System should be returned in the original
packing.
18 18-06-2008 126682 00