Operating And Safety Instructions - Ametek T-900 Series Operation Manual

Reference Indicator Reference Indicator Included
nVision . . . .NV No . . . -NONE
Series . . .IS30
XP2i . . . . . . .XP2i
m1 . . . . . . . . .M1

Operating and Safety Instructions


Reference Pressure Port Connections
The reference indicator threads to the upper side of the calibration hand pump. A finger-tight connection is sufficient (if utilizing an AMETEK Jofra quick connector
or a CPF fitting). If adapters are used, bonded seals and Teflon tape may be necessary.
Pump System Liquid (HOX only)
System A (T-960) . . . . . . . . . . . . . . - Drained . . . -E
AXX
System A (T-970) . . . . . . . . . . . . . . -
AHX
System B (T-965) . . . . . . . . . . . . . . -
BXX
System B (T-975) . . . . . . . . . . . . . . -
BHX
System H (T-975 and T620H) . . . -
HOX
Carrying Case
Aluminum . . . .(omit)
Waterproof . . .-W
SAMPLE PART NUMBERS

IS30-NONE-HOX-E-W
NV-NONE-AXX
. . . . . . . . . . . . System A pump system (for nVision) with an aluminum carrying case.
M1-NONE-BXX-W
15PSIXP2i-AXX-W
. . . System H pump system (for 30 Series) with a water- proof case and the pump
drained of fluid.
. . . . . . . . System B pump system (for m1) with a waterproof carrying case.
. . . . . . . System A pump system with an XP2i gauge and a waterproof carrying case.
Operating and Safety Instructions
T-900 Series Pump Operation Manual