Operating Instructions - Ametek T-620 User Manual

4.0

Operating instructions

Warning......
About the handling:
•
Avoid knocking, bumping or dropping the pressure
system. This can cause permanent damage to the
system and loss of accuracy.
About the use:
•
Do not attach the pump to a high pressure source.
Please notice that the pump comes in 2 different
pressure ranges. Therefore it is very important to check
the version of the pump to avoid over pressure of
indicator.
Follow these instructions carefully to avoid damage to
the system and/or personal injuries.
•
The pressure system must not be used for any
purposes other than those described in this manual and
for any application other than precision pressure
calibration jobs.
•
Never subject the pressure gauges to overpressure. In
case of overpressure the gauge should not be used for
calibration purposes.
•
The pressure system should only be used by TRAINED
PERSONNEL.
•
None of our calibration systems are cleaned or
prepared for OXYGEN MEDIUMS so DO NOT USE our
systems for this purpose.
•
Do not disconnect any parts from the system when
pressurised.
•
Do not connect any external pressure source to this
instrument. This unit is designed to test pressure
measuring devices connected to the manifold only.
Pressure from an external source can result in
explosion of the liquid reservoir and possible personal
injuries.
10 18-06-2008 126682 00