Anchor Outdoor Unit - Kaden KS09 Installation Manual

Step 3: Anchor outdoor unit
The outdoor unit can be anchored to the ground or to a
wall-mounted bracket.
Unit mounting dimensions
The following is a list of different outdoor unit sizes and the
distance between their mounting feet.
Prepare the installation base of the unit according to the
dimensions below.
Model
KS09, KS12
KS18
KS24, KS28
If you will install the unit on the ground or on a concrete
mounting platform, do the following:
1. Mark the positions for four expansion bolts based on
dimensions in the Unit Mounting Dimensions chart.
2. Pre-drill holes for expansion bolts.
3. Clean concrete dust away from holes.
4. Place a nut on the end of each expansion bolt.
5. Hammer expansion bolts into the pre-drilled holes.
22 | Kaden Installation Manual
J3387_Kaden_Installer_Manual_050917.indd 22
Outdoor Unit Dimensions (mm)
W x H x D
800x554x333 (31.5"x21.8"x13.1")
845x702x363 (33.25"x27.63"x14.29")
946x810x410 (37.21"x31.9"x16.14")
Air inlet
Air inlet
Air outlet
Fig. 4.5
Mounting Dimensions
Distance A (mm)
514 (20.24")
540 (21.26")
673 (26.5")
6. Remove the nuts from expansion bolts, and place outdoor
unit on bolts.
7. Put washer on each expansion bolt, then replace the nuts.
8. Using a wrench, tighten each nut until snug.
WARNING
When drilling into concrete, eye protection
is recommended at all times.
Distance B (mm)
340 (13.39")
350 (13.8")
403 (15.87")
5/09/2017 9:08 AM