Deleting A User Defined Transponder Memory Plan; Deleting A Logger File (Logger Memory Plan) - Rover Instruments MASTER STC User Manual

Press and hold for 2'' the MPEG SERVICE LIST
Navigation Mode, highlight the item FILE MANAGER and press the encoder knob [D] to
enter the FILE MANAGER menu.

DELETING A USER DEFINED TRANSPONDER MEMORY PLAN

Highlight the item SELECT TYPE and select PLAN.
Then highlight the item SELECT FILE and select the memory plan to be deleted (PLAN
1, PLAN 2, ...).
Highlight the item DELETE. Press the encoder knob [D] to delete the selected memory
plan.
The meter will confirm the selected plan has been deleted (DELETED!). The warning
message VOIDED! means you have tried to delete a permanent and not erasable
memory plan (e.g.: EUTE70).

DELETING A LOGGER FILE (LOGGER MEMORY PLAN)

When an auto Meas&Store procedure has been completed (see Chapter 21 SATELLITE
AUTO MEAS&STORE (DATA LOGGER) at page 67), the relevant data are stored into a
user defined target Logger Memory Plan.
To delete a logger memory plan, highlight the item SELECT TYPE and select the item
LOGGER.
Then highlight the item SELECT FILE and select the Logger File to be deleted (LOG.01,
LOG.02,...).
Highlight the item DELETE FILE. Press the encoder knob [D] to delete the selected
Logger Memory Plan.
The LCD will confirm the Memory Plan deletion (DELETED!).
70
MASTER STC
USER MANUAL
[B] key. Using the Standard