Meter Configuration; Meter Loudspeaker Volume Setup; Meter Setup; Battery Saving - Self Power Off (Timer Off) - Rover Instruments MASTER STC User Manual

8

METER CONFIGURATION

Press and hold for 2s the MPEG SERVICE LIST
8.1

METER LOUDSPEAKER VOLUME SETUP

Using the Standard Navigation Mode, highlight the item VOLUME and adjust the volume
level of the built-in loudspeaker: you can highlight one level among: 0% (loudspeaker off),
20%, 40%, 60%, 80%, 100% (max. volume).
8.2

METER SETUP

Rotate the encoder
Press the encoder [D] to enter the meter setup menu.
BATTERY SAVING – SELF POWER OFF (TIMER OFF)
If no key of the meter is pressed within the self power off time herein sat, the meter
automatically turns itself off in order to save battery life. To set up the auto power off
time, rotate the encoder [D] to highlight the item TIMER OFF, then press it. The black
icon which highlights the item POWER OFF starts blinking. Rotate the encoder [D] and
select: OFF (meter always on), 5 min (meter turns off in 5 minutes), 10 min (meter turns
off in 10 minutes). OFF (meter always on). Press the encoder [D] to enter your selection.
14
MASTER STC
USER MANUAL
[D] to highlight the item METER SETUP.
[B] key.