Full Band Signal Level Comparison Between Two User-Defined Channels (Tilt)41 - Rover Instruments MASTER STC User Manual

the LCD top right edge. The LCD bottom row displays the video peak level measured
in the currently selected channel (MRK) together with the measurement unit currently
set for the meter. An horizontal dotted line shows the real time video peak level
measured in the currently selected channel.
This measure makes sense when performed on analogue signals only.
FULL BAND SIGNAL LEVEL COMPARISON BETWEEN TWO USER-
DEFINED CHANNELS (TILT)
Two triangle - shaped markers on the x-axis locate the two channels whose signal
level is under comparison.
Each bar displays the signal level measured in the relevant channel.
The LCD top row displays the two channels (1: and 2:) whose signal level has to be
compared. The LCD bottom row displays (TLT, tilt) the difference between the signal
level value measured in channel 1: and the one measured in channel 2:.
To select the channels whose signal level has to be compared, using the Standard
Navigation Mode highlight the channel (1:A; 2:F) to be edited. Then rotate the encoder
[D] to select the desired channel.
MASTER STC
USER MANUAL
41