Fine-Tuning The Frequency Value; Direct Frequency Input - Rover Instruments MASTER STC User Manual

Using the Standard Navigation Mode, highlight the item MANUAL MEMORY, then select
the required channels group (MANUxx plan).
Press once and release the MEAS
The LCD [C] top row will display (from left to right): the selected channel plan, the currently
tuned channel and the corresponding frequency value.
Press the encoder [D] to highlight the current channel ID and rotate it to surf the channels
within the selected memory plan. Each step of the encoder moves the channel ID one step
forward or backward. To speed up the channel ID selection, rotate the encoder [D]
continuously.
THE METER WILL TUNE ONLY THE CHANNELS INCLUDED IN THE SELECTED
CHANNEL PLAN. To explore/navigate into a new user defined channel plan, press
once and release the PLAN key and, using the Standard Navigation Mode, highlight
the MANUAL MEMORY item to select the required channel plan.

FINE-TUNING THE FREQUENCY VALUE

Should you need to change the frequency value, using the Standard Navigation Mode
highlight the current frequency value and set the desired frequency value (Frequency
range: 45 – 878 MHz).

DIRECT FREQUENCY INPUT

Using the Standard Navigation Mode, highlight the current frequency value, and then
press and hold the encoder knob [D] for 3''. The frequency value will be reset and a
black icon will appear to right of the "F" indicator.
This way, the BLOC NUM function is active. Enter the desired Frequency Value (in
MHz) using the numerical keys on the front panel (as described into the chart FRONT
PANEL AND KEYBOARD at page 8). To insert the comma (e.g. frequency value:
MASTER STC
USER MANUAL
[5] key.
21