Get to know your MASter SAt eVo FRONT PANEL _____________________________________________________ • power To turn on TO Turn Off press the press and hold ‘HOME’ key. the ‘HOME’ key • Arrow KeYS use the arrow keys to select a function from the menu Keep EnTEr use the pressed for...
Page 3
SiDe pAnelS ______________________________________________________ • riGHT SiDe If/rf InPuT COnnECTOr, “f” TyPE, 75 Ω 2. rJ 45 LAn COnnECTOr • leFT SiDe 3. POwEr SuPPLy InPuT COnnECTOr (12 V DC - 1A) uSb SOCKET fOr Sw uPgrADES AnD MEMOry PLAnS...
Page 4
HoMe And nAVIGAtIon ‘HoMe’ Screen _________________________________________________ Press the ‘HOME’ key to go to the main menu, use the ArrOw keys to navigate to the SAT icon and press EnTEr to select the measurement mode required: Press the ‘HOME’ key at any time to return to the home screen nAViGATion ______________________________________________________ use the ArrOw keys to navigate in the screens and change values:...
VoluMe & ConfIGurAtIon (configuration also for eXTenDeD FreQuencY wiDe BAnD lnB) Volume selection is immediately active, press “EnTEr” for the Display configuration and other important settings BATTerY SAVinG AnD TiMer oFF _______________________ Settings for battery save mode. Choose “bATTEry SAVIng” from the volume screen.
Page 6
SAT conFiGurATion _________________________________________ navigate in “COnfIgurATIOn MEnu” in the volume screen. Select “SAT” for main settings lnB l.o. SelecTion Press EnTEr on “Lnb L.O.” to chose the Lnb type: STAnDArD or wIDEbAnD If wIDEbAnD (extended frequency) is selected, in all Measurement and Spectrum displays, “V/wB”...
AnAlYZe SATelliTe TeleViSion SiGnAlS SAT MoDe _________________________________________________________ SAT channel plan screen "Satellite information (mux data) is provided in cooperation with lyngSat www.lyngsat.com” DiGiTAl SAT MeASureMenT DiSplAYS DVB-S AnD DVB-S2 _____ Main measurements & live picture navigate in the picture and press EnTEr to enlarge, press again to return to measurement mode.
Page 8
ViSuAliZe niT _____________________________________________________ Touch “MEnu&?” from the “MAIn Touch “VISuALIZE nIT”. MEASurEMEnTS & PICTurES”. example 1: “nIT InfO VISuALIZATIOn” referring to an ASTrA 19 East transponder relATeD FuncTionS __________________________________________ SAT Channel MPEG SERVICE MPEG SERVICE MPEg Plan Spectrum service list Selection Analyzer...
Page 9
SPECT SPECT SPeCt SpecTruM AnAlYZerS SwiTcH To SpecT MoDe ____________________________________ SPECT SPECT In the spectrum menu, among others, you may set your markers, your grid resolution, the resolution bandwidth filter for more details and save your spectrum picture in the meter’s memory. This spectrum picture may be recalled and used for static analysis and comparison with the live spectrum.
Page 10
MPEG SERVICE MPEG SERVICE lISt MpeG SHow AnD SelecT AVAilABle MpeG TS SerViceS SerVice MPEG SERVICE MPEG SERVICE Or navigate in Vpid - Apid in the measurement windows and press EnTEr twice navigate in Vpid - Apid & use the press enter to return to the arrow keys measurements or press the...
SPECIAL SPECIAL SPeCIAl funCtIonS SPECIAL SPECIAL BuZZer & noiSe MArGin GrApH ______________________ navigate in: buzzer & graphic of the progress of the nOISE buZZ&nOIS.MArg.gr MArgIn for the tuned channel according to time. • high tones = the bEST noise Margin level •...
SAT FinDer ________________________________________________________ To change the displayed transponders navigate in “SAT fInDEr” manually, touch “stop” and select the wanted tp/ts. Touch “start search” to start. If the chosen satellite is found the buzzer will start, if this does not happen, continue looking for the right satellite.
Page 13
MEMORY MEMORY MeMory cHAnnel plAnS AnD loG FileS MEMORY MEMORY loGGer SAVe ____________________________________________________ Touch “SAVE DATALOggEr” and set the DATA LOggEr run parameters required. Touch “STArT SAVE” to create a new log file n.B.: The “STop & Go” function will help you when running a loGGer by asking you to move the cable lead to the appropriate Lnb output SAT signal source.
Page 14
SerVICe And SuPPort weB reGIStrAtIon And SoftwAre uPGrAdeS Free Sw upGrADe and newSleTTer SerVice: • ROVER offers you the possibility of carrying out Free Software and Memory plan upgrades on your Meters, by simply rEgISTErIng your data in the update Sw Area; •...
SoftwAre uPGrAdeS SoFTwAre upGrADeS: Once you have identified and downloaded the correct roVer S.M.A.r.T. program on your pc ( for more information, read the respective S.M.A.r.T. page in this user guide ) install it on your pc in order to upgrade your Meter’s Software ( Sw ). Then proceed as follows: •...
Page 16
tV & SAt MeMory PlAn uPGrAdeS MeM plAnS upGrADeS: Once you have identified and downloaded the correct rOVEr S.M.A.r.T. PrO program on your PC ( for more information, read the respective S.M.A.r.T. page in this user guide ), install it on your PC in order to load the Memory Plans in your Meter.
Page 17
lI-Ion PolIMer BAtterIeS iMporTAnT: • AlwAYS Turn THe inSTruMenT oFF BeFore connecTinG THe BATTerY cHArGer; • Do noT leAVe THe BATTerieS DiScHArGeD For lonG perioDS; • AlwAYS cHArGe THe BATTerieS AT niGHT For AT leAST 7 HourS, eVen iF THeY Are noT coMpleTelY DiScHArGeD.
Page 18
BAttery teSt & BAttery reGenerAtIon THiS proceDure eXplAinS How To reGenerATe/cHecK Your BATTerieS AnD cAliBrATe THe BATTerY cHArGe inDicATor uSeFul ADVice: • Charge the batteries every night after use, even if they are not completely discharged; • Always use the “battery save” & “timer off” functions to increase your meter’s autonomy; •...
Page 19
Power SuPPly (MAInS) And BAttery CHArGe (CHrG) led StAtuS CONNECTED INSTRUMENT TO THE MAINS NOTES LED MAINS LED BATT CHRG POWER SUPPLY Batteries sufficiently charged Battery operation Flashing The meter does not turn on. 2 SECONDS OFF Recharge the batteries. 0.5 SECONDS ON Flashing Abnormal battery temperature.
Meter MAIntenAnCe cleAninG THe MeTer Cleaning the meter from dust and dirt is easy and helps mantaining it in optimal work conditions through the years. The cleaning procedure is simple and quick and requires only minor attention. never use chemical aggressive products (diluent) and/or abrasive or rough clothes which may damage plastics and displays.
Page 21
SerVICe noteS and GuArAntee reGulAtIonS (CEE and EXTrA CEE) rOVEr Laboratories. S.p.A. has a standard guarante period of 12 months. This is extended to 24 months for countries within the European Community, and in any case, in accordance with the laws and/or possible regulations applied in your country. GuArAnTee reGulATionS: 1.
risks and costs for transport to rOVEr Laboratories S.p.A. must be sustained by the buyer. After repair, if the equipment is under guarantee, rOVEr Laboratories S.p.A. will pay for the transport returning the goods to the customer. If the instrument is not under guarantee, after repair, the equipment will be returned by courier service with the amount to be paid by the customer shown on the invoice.
Page 23
IdentIfICAtIon forM (rMA) roVer inSTruMenTS SerVice DepArTMenT • Fax: +39.030.9906894 -mail: wecare@ roverinstruments.com • Subje FAulT identification Form pleASe Fill in All AreAS. cuSToMer inForMATion: • Date ........Company: ......................• name and surname of the holder *: ......................
SuGGeSted VAlueS This table shows the suggested measurements at a user’s socket for the main digital modulations. � DVB-T2 & GB COFDM dBµV dBµV PE R – 7 256 QAM 2 / 3 FEC 26,5 29,5 256 QAM 3 / 4 FEC 28,5 31,5 256 QAM...
ACCeSSorIeS SuPPlIed liST oF AcceSSorieS SupplieD: • Soft bAg • removeable side pocket for tools and accessories • Shoulder strap • battery charger power supply • user guide (CD) • f female - f female connector • QuICK f Male - f female connector noTe: This list of accessories is subject to change without notice and depends on the meter’s configuration.
Page 27
IndeX – get to know your MASTEr SAT EVO – Home and navigation – Volume and Configuration SAT: Analyze Satellite Television Signals SPECT SPECT – SPECT: Spectrum Analyzer MPEG SERVICE MPEG SERVICE – LIST: Show and select available MPEg TS services HELP: inspect the parameters of an unknown signal –...
customer Support wecare@roverinstruments.com +39 030 9198 299 skype only for call ® wecare.roverinstruments ug-MASTErSATEVO-En-V1 Designed in Europe, Assembled in Europe rO.VE.r. LAbOrATOrIES S.p.A. Via Parini 2, 25019 Sirmione (bS) Italy tel. +39 030 9198 1 fax +39 030 990 6894 product specification are subject to change without notice .
Need help?
Do you have a question about the MASTERSAT Evo and is the answer not in the manual?
Questions and answers