Endress+Hauser Levelflex M FMP45 Operating Instructions Manual page 25

Levelflex M FMP45 4 to 20 mA HART
5.4.6 Function "full calibr." (006)
ENDRESS + HAUSER
–
+
E
This function is used to enter the distance from the minimum level to the maximum level
(= span).
F
!
Note!
The usable measuring range lies between the upper blocking distance and the probe end.
The values for empty distance "E" and span "F" can be set independently of this.
Endress+Hauser
⇒
100%
F = full calibration (= span)
F max = E – upper blocking distance
0%
Commissioning
L00-FMP4xxxx-14-00-06-en-009
25