Advertisement
Available languages
Available languages
5. Keepsprayguna safedistance fromspray
surface.
WARNING
" Keep spray nozzle be_een 8 to 2,1 inches a_ay from
c!eaning surfase.
, Operate this unit on a Stab]e Surfase
, Be extremely careful if you must use the pressure
_asher
from a !adderi scaffolding
0r any other relati#ely
unstable Iocatieni
, F!rrnly grasp spray gun with both hands when using high
pressure spray to avoid injury if gun kiCkSbaCk.
.
7.
Apply a high pressure spray to a small area and
then check the surface for damage. If no damage,
proceed to step 7.
Start at top of area to be rinsed, working down
with same overlapping strokes used for cleaning.
How to Use the Hose Reel
Your cleaning system is equipped with a hose reel
designed to store the hose when unit is not in use.
See "Prepare Unit for Storage" for long term storage of
more than 30 days.
Alter each use:
1.
Disconnect hose from spray gun and high
pressure outlet on pump.
2.
3.
Drain water from hose.
Slide one end of hose into hole on hose reel. Turn
hose reel with handle to coil hose onto reel.
IMPORTANT:
DO NOT use your cleaning system with
the hose coiled onto the hose reel. The hose reel is for
storage purposes only.
Automatic
Cool
Down
System
(Thermal
Relief)
If you run the engine on your pressure washer for
3-5 minutes without pressing the trigger on the spray
gun, circulating water in the pump can reach
temperatures above 125=F. The system engages to
cool the pump by discharging the warm water onto
the ground.
11
Advertisement
