2. Mounting
2 Mounting
Tools required
- 1 Phillips screwdriver
- 1 hammer
- 1 knife
- 8 - 13 - 17 - 18 - 19 spanners
- 1 putty gun
- 1 JDTE or JDTE Plus or simplified JD assembly tool
- 1 water pump pliers
- 45 mm spanner or parallel groove clamp
- 1 brush
Symbols used
4
Caution danger
Specific information
Reference
GT 330
Warning: Assemble the boiler in the order given by the
numbers of each figure, in compliance with all the
instructions.
Risk of injury and damage to equipment. Attention must be paid to the warnings on
safety of persons and equipment.
Information must be kept in mind to maintain comfort.
Refer to another manual or other pages in this instruction manual.
20/09/11 - 300007653-001-D