Table of Contents
Advertisement
6. 6
Using USB to display images
*Use a cable that has a mini USB (B type) connector for the USB port on the camera.
*Separate viewer software is needed that is compatible with USB video class devices to display the camera images.
The following items can be controlled from the computer via a USB cable. Some items may not be supported,
depending on the viewer software you are using.
Resolution:
(1) 220 x 220 YUY2
(2) 440 x 440 YUY2
(3) 640 x 480 YUY2
Exposure time:
AUTO ON: Electronic shutter enters the AUTO mode.
AUTO OFF: Electronic shutter enters the MANUAL mode.
In the manual mode, it can be set from OFF to 1/3000 s.
White balance:
White balance enters the AWB mode.
The color temperature can be set to 3200 K or 5600 K.
Note:
The exposure time and white balance settings are registered when set while images are displayed via USB.
The next time you start using USB to display images, these settings are applied, regardless of the current
camera settings.
approx. 60FPS
approx. 60FPS
approx. 30FPS
16
Advertisement
Table of Contents
