5 ) Process2; (5. 1) Changing Detail (Outline) Gain; (5. 2) Change Of Detail Boost Frequency; (5. 3) Change Of Horizontal And Vertical Detail Balance - Toshiba IK-CT2D Instruction Manual

( 5 ) PROCESS2

Move up and down by
pushing MENU UP, DOWN
-- 5 PROCESS2 --
DTL GAIN
DTL FREQ
HV BALANCE
DNR

(5. 1) Changing detail (outline) gain

Move the "
1
2
The detail decreases.

(5. 2) Change of detail boost frequency

This is the item for setting the screen outline thickness.
1
Move the "
2

(5. 3) Change of horizontal and vertical detail balance

This is the item for changing the ratio of the vertical detail quantity to the horizontal one.
1
Move the "
2
The vertical detail becomes smaller
(5. 4) Changing DNR (Digital Noise Reduction)
Move the "
1
2
Note:
Select the desired value by
pushing DATA UP, DOWN
(FILE A)
10
10
16/16
OFF
0
1
Thick outline
8/16 16/16
Detail gain setting 0 to 31
Detail boost frequency 1 to 16
Ratio of vertical detail quantity to horizontal one
8/16 to 24/16
Digital noise reduction ON, OFF
The detail increases.
10 31
Thin outline
10 16
The vertical detail becomes larger
24/16
27