Tools And Test Equipment - Motorola V600 Service Manual

Level 1 and 2 Service Manual

Tools and Test Equipment

Table 1. General Test Equipment and Tools
Motorola Part Number
RSX4043-A
--
—
See Table 7
0180386A82
6680388B67
6680388B01
—
8102430Z04
1. To order in North America, contact Motorola Aftermarket and Accessories Division (AAD) at (800) 422-4210 or
FAX (800) 622-6210; Internationally, AAD can be reached by calling (847) 538-8023 or faxing (847) 576-3023.
2. Not available from Motorola. To order, contact Hewlett Packard at (800) 452-4844.
6809468A79-O
1 and 2
V600
6809468A79-O
The following table lists tools and test equipment recommended for disassembly
and reassembly of V600 telephones. Use either the listed items or equivalents.
1
Description
Torque Driver
#0 Cross Point Screwdriver
Torque Driver Bit T-5 Plus, Apex 440-6IP
Torx Plus or equivalent
Rapid Charger
Antistatic Mat Kit (includes 66-80387A95
antistatic mat, 66-80334B36 ground
cord, and 42-80385A59 wrist band)
Disassembly tool, plastic with flat and
pointed ends (manual opening tool)
Tweezers, plastic
Digital Multimeter, HP34401A
GSM / DCS Test SIM
2
October 10, 2003
Tools and Test Equipment
Application
Used to remove and replace screws
Used to remove cross point screws in
the flip assembly
Used with torque driver
Used to charge battery and to power
device
Provides protection from damage to
device caused by electrostatic discharge
(ESD)
Used during assembly/disassembly of
device
Used during assembly/disassembly
Used to measure battery voltage
Used to enable manual test mode
21