Table of Contents
Advertisement
2.
Insert a tape with safety tab in place.
3.
If your VCR viewing channel is 3 or 4, make sure the VCR
indicator
appears in the VCR's display panel. If not, press
TVoVCR to turn it on.
4.
Use the SPEED button
on the remote to select a recording
speed. The tape speed indicator
appears on the TV screen.
5.
Select the channel or line input to be recorded.
6.
Set the Reception: STEREO/MONO/SAP feature for the type of
audio you want to record. See Other Features section.
AUDIO
I
Reception:
STEREO
2
Tape
Playback:
HI-FI
i 0
Exit
7. Press RECORD
to start recording.
8. Press STOP when you are finished.
Video Input
Channel Explained
For more information
about video
line input, see "How to Find Your TV's
Video Input Channel" in the
References section of this manual.
RECORDING
AUDIO
ONLY
You can record audio only from another
audio source connected
to the AUDIO IN (R and L) jacks on the back or front of the VCR.
1.
Press the INPUT button
on the remote to select the line
input (L1 or L2). Select (L1) to record from the back jacks or
(L2) to record from the front jacks.
The VCR wirl record audio from the audio equipment
connected to the AUDIO IN jacks.
2.
Use TAPE SPEED on the VCR (SPEED on the remote) to select
the recording
speed.
3.
Start audio source playing
and press RECORD to begin
recording.
4,
Press STOP when you are finished,
PLAYING
BACK AUDIO
ONLY
To get stereo sound, connect the AUDIO OUT jacks of the VCR to
the appropriate
input on your amplifier
or receiver. Do not use
the phono input, Refer to your amplifier
or receiver user's guide.
Continued on the Next Page
I
ecording audio only wilt erase
anything that was previously
recorded on the tape.
Audio
Connection
BACK
OF VCR
I
.... i I
p_oNO
TUftER
BACK OF AMPLIFIER
/ RECEIVER
35
Advertisement
Table of Contents
