Table of Contents
Advertisement
ON.OFF
Turns a compatible
TV off and on.
VOL Up and Down
Raises and lowers sound of TV.
PLAYI NG A TAPE
I.
Tune the TV to your VCR viewing channel (3, 4, or TV's video
input- see page 68 for more abo_
the video input channel),
Press the VCR button
on the remote control to switch to VCR
viewing mode (The front panel display will indicate "VCR").
2.
Insert a tape in the VCR,
If the Auto Play feature is set to ON, the tape automatically
begins playback (if the safety tab on the cassette is removed).
•
Press FWD or REV to position the tape.
•
Press PLAY PAUSE (if necessary) on the VCR (PLAY on remote)
to begin tape play.
•
Press PLAY PAUSE (PAUSE on remote) for stop action.
•
Press TRACKING up or down to remove any streaks from the
picture,
if necessary.
•
Press STOP*EJECT on VCR (STOP on remote) to stop playback,
AUTOMATIC
REWI N D
The VCR automatically
rewinds the tape if it reaches the end of
the tape during playback. While rewinding,
you can press
POWER on the VCR (ON,OFF on remote) and the VCR will turn
off after rewinding.
I Pause
TAPE EJECT
Press STOP.EJECT on the VCR (STOP on remote) for a few seconds
when it is stopped to eject the tape, A tape can be ejected even
when the VCR is off.
If you pause, the VCR automatically
switches
from pause to stop after
a
few minutes
to reduce
tape wear.
Automatic
Tracking
The VCR has automatic
tracking
which adjusts the picture when
playing
back a tape recorded
on
another
VCR. Automatic
tracking
is turned
on whenever
a tape
is
inserted
or the VCR's power
is
turned
on.
26
Advertisement
Table of Contents
